Home Specifications Contact


RAYVIN 30 – Hull Deck and Bulkheads with modules

SPECIFICATIONS

• Length overall 9 metres
• Beam 5.5 metres
• Draft 0.9 metres
• Mast height above W/L 13.3 metres
• Mainsail area 34.6 sq metres
• Genoa area 22 sq metres
• Storm jib area 3.4 sq metres
• Screecher area 35.77 sq metres
• Spinnaker area 70.31 sq metres

HULL

• Hull and Bridge-deck - Glass and balsa core sandwich composite construction
• Lloyds Approved resin system – incorporating alternating csm and quadraxial fabric
• 16mm Balsa used in construction and vacuum- bagged
• Uni-directional stiffening along bridge-deck
• Solid glass below the waterline
• Structural bulk-heads are fiberglass and balsa core composite- vacuum bagged

DECK

• Deck – Glass and balsa core sandwich composite construction with vacuum bagged core.
• Lloyds Approved resin system – incorporating alternating csm and quadraxial fabric
• Uni-directional stiffening along cabin top and around windows.
• Deck surface with moulded non-skid

MODULES INCLUDE:

• Saloon seat
• Galley unit
• Nav centre
• Chart table
• Head compartment
• Hand basin
• Aft bunks
• Forward bunk
• Hanging lockers
• Sliding lockers

RUDDERS

• Rudder tubes with all reinforcing
• Rudder shafts
• Rudder blades

Please email us for current pricing.

TERMS

 10 % deposit on signing
 40 % on commencement of build
 50 % on completion of HDB.
• We reserve the right to change the specs prior to signing of any sales agreement due to fluctuation in currency and availability of hardware.
• This quote is valid for 30 days from date of receipt of this quote.



 



RAYVIN 30 - Basic Sail away Inventory


SPECIFICATIONS
  • Length overall 9 metres
  • Beam 5.5 metres
  • Draft 0.9 metres
  • Mast height above W/L 13.3 metres
  • Mainsail area 34.6 sq metres
  • Genoa area 22 sq metres
  • Storm jib area 3.4 sq metres
  • Screecher area 35.77 sq metres * (optional extra)
  • Spinnaker area 70.31 sq metres

HULL
  • Hull and Bridge-deck - Glass and balsa core sandwich composite construction
  • Lloyds Approved resin system – incorporating alternating csm and quadraxial fabric
  • 16mm Balsa used in construction and vacuum- bagged
  • Uni-directional stiffening along bridge-deck
  • Solid glass below the waterline
  • All below waterline skin fittings are silicone bronze
  • Structural bulk-heads are fiberglass and balsa core composite- vacuum bagged

DECK AND FITTINGS

  • Deck – Glass and balsa core sandwich composite construction with vacuum bagged core.
  • Lloyds Approved resin system – incorporating alternating csm and quadraxial fabric
  • Uni-directional stiffening along cabin top and around windows
  • Hardwood inserts installed in high-stress areas viz. mast step and chain plate areas.
  • Deck surface with moulded non-skid
  • Winches are all “Harken” self-tailiors
  • All jammers are “Spinlock”
  • All chain plates in 316 Stainless Steel – 8mm thick
  • Anchor locker with recessed lid and catches
  • Cabin windows - non opening in 9.5mm tinted Shatterprufe Glass – flush with cabin top and sides
  • 1 x Custom opening window giving access to Galley from cockpit
  • Sliding door at entrance to saloon
  • 1 x 9kg gas bottles in self-ventilating locker
  • 2 x Pulpits
  • 2 x Pushpits
  • 1 x Double helm seat
  • 8 x Stanchion bases
  • 8 x Stanchions
  • 4 x Corner cleats
  • 1 x Mooring cleat
  • 2 x Genoa tracks with car stops and ends- “Harken”
  • Mainsheet system with blocks- “Harken”
  • 15 kg CQR Anchor with 10m of 8mm chain and 55m of braided warp
  • 15 kg Danforth Anchor with 10m of 8mm chain and 55m of braided warp
  • 4 x Drains in cockpit floor with scuppers
  • 2 x Cockpit lockers with lids
  • All lockers flow-coated white
  • All sailing sheets supplied for main Genoa and traveler
  • Guard rails in 4mm Stainless Steel
STEERING SYSTEM
  • 6OO mm Stainless steel wheel with lock
  • “Edson” steering system
  • 2 x Underslung rudders with 40 mm solid stainless shafts
  • 2 x Rudder tubes with vesconite bushes
  • 1 x Stainless steel tie-bar with built in alignment facilities.
  • Open wire sheave system
  • Stainless Steel Emergency tiller – thru deck
SALOON
  • Seating for 8 with cloth upholstery
  • Storage lockers below saloon seat
  • Saloon table in maple or cherry
  • 7 x Halogen downlighters 10 watt each
  • 2 x opening “Gebo” hatches- 520 x 520 flushline
  • All round view
  • "Isotherm" fridge
  • Chart and accessory locker
  • Wood trim and cupboards in maple or cherry
AFT CABINS - PORT AND STARBOARD
  • Double bunk covered in cloth upholstery 2000mm x 1400mm
  • Opening “Gebo” hatch- 420 x 420 flushline
  • 1 x Opening portlight
  • 1 x Hanging locker
  • 1 x Storage locker
  • Wood trim and cupboards in maple or cherry
  • Fluorescent cabin light
  • Granite look counter tops

STARBOARD FORWARD OWNERS CABIN.

  • Double bunk 2100mm x 1600mm
  • 1 x Hanging locker
  • 2 x Storage lockers
  • Opening “Gebo” hatch 520 x 520 flushline
  • 1 x Opening portlights
  • Wood trim and cupboards in maple or cherry
  • Fluorescent cabin light
  • Dressing area with vanity
GALLEY
  • Galley up on bridgedeck
  • Large counter-top with sink – SMEV
  • Single lever chrome taps
  • Pressurized hot and cold water
  • 3 Plate stainless steel gas stove with flame failure valve - SMEV
  • 8 x storage lockers in hulls
HEADS COMPARTMENT
  • Situated in port forward cabin
  • Opening “Gebo” hatch 520 x 520 flushline
  • 1 x Opening portlights - Gebo
  • Includes light-weight toilet – RM
  • Fluorescent light
  • 3 x Linen lockers
  • 1 x Cosmetic locker with mirror
  • Hand basin
  • Shower with pressurized hot and cold water
PLUMBING
  • 2 x fresh water tanks - total capacity 400 litres
  • Liqui food grade hosing throughout
  • All sinks are self-draining
  • All tanks have vents
  • 1 x “Whale” pressure pump
  • 1 x Calorifier – 22 litre engine heat or 220 volt
  • 2 x Electric bilge pumps
  • All bilge pumps are fitted with non-return valves
  • All single lever taps
  • All pipes fitted with double “all stainless steel” hose clamps
  • Hot and cold water pressurized system
ELECTRICAL
  • Electrical system on board is 12 volt
  • Lighting wiring run in conduit inside the balsa core – no external conduits on roof lining
  • All wiring in 2.5mm silicone tinned cable
  • All cables marked in full, and labels sealed
  • Battery cables in 35mm sq. multistrand copper cable with heat shrink on ends
  • Batteries consist of 2 x 105 “Deltec” deep cycle batteries
  • Switch Pack - 29 switches
  • Speed, depth & wind speed instruments - Navman
  • VHF radio - Navman
  • Bulkhead compass - Silva
  • Furuno bulkhead mount G.P.S.
  • 1 x separate starting battery
ENGINES
  • 2 x Volvo saildrives 13 Hp lightweight high performance
  • 2 x 2 Blade fixed props – optional folding racing props
  • 2 x Instrument panels
  • 2 x Fuel water separators
  • 1 x Diesel tanks 200 litres
  • Double engine control mounted in cockpit - Morse
  • Dedicated starting battery
  • 2 x in-line water strainers
RIGGING AND SAILS
  • 12 metre Aluminium mast complete with standing and running rigging - Sparcraft
  • Roller furling for genoa
  • All navigation lights fitted to mast
  • Deck spotlight
  • Sails by “Quantam”
  • 1 x Fully battened main
  • 1 x Genoa sail
  • 1 x Storm sail
  • 1 x Aluminium cross-beam with seagull striker
  • 1 x Bow roller
  • 2 x Aluminium compression posts
  • 1 x Catwalk with wooden slats
  • 2 x Trampolines – white supertramp material

TERMS OF SALE:

  • 10 % Deposit on order
  • 20% On commencement of build
  • 30 % On completion of HDB
  • 30 % On completion of systems
  • 10 % Before Launch
  • We reserve the right to change the specs prior to signing of any sales agreement due to fluctuation in currency and availability of hardware.
  • This offer is valid for 30 days from date of receipt of this quote.








Home | Specifications | Contact